Easton Avance 4mm Carbon Target Arrow Shaft

Easton Avance 4mm Carbon Target Arrow Shaft

Item # 20708960101 | Catalog Page # 49
$10.75
SHAFT SIZE: 
Lancaster Archery can custom cut your arrow shafts for you. Enter your precise shaft length (as a fraction to the 16th of an inch – e.g. 28-9/16”) as measured from end to end of the shaft, excluding any hardware (nocks, bushings, inserts, and points). If you leave this field blank, your shafts will be shipped uncut at full length.
Qty
12

PROPOSITION 65

WARNING: cancer and reproductive harm - www.P65Warnings.ca.gov

Description

  • 100 % Carbon Construction
  • Straightness +\- .0025
  • Weight tolerance +\- 1 grain
  • Components sold separately 
  • Inside diameter: .166"
  • Parallel design
  • Weight: 340 spine 8.8 gpi | 400 spine 7.9 gpi |450 spine 7.4 gpi | 500 spine 6.9 gpi | 550 spine 6.5 gpi | 600 spine 6.5 gpi | 660 spine 6.2 gpi  | 730 spine 5.7 gpi | 810 spine 5.5 gpi | 900 spine 5.2 gpi | 1000 spine 4.9 gpi | 1150 spine 4.9 gpi | 1400 spine 4.2 gpi | 1600 spine 3.8 gpi | 1800 spine 3.6 gpi | 2000 spine 3.4 gpi
  • Avance compatible with Easton 4MM G Nock #2070125
  • Weight: 7 grains 
  • Avance compatible with Easton 4MM Pin #2070338  
  • 2000-1400 use #1 | 1150-730 use #2 |660-550 use #3 | 500-340 use #4
  • Compatible with all Pin Nocks
  • Weight: 9 grains
  • Avance compatible with Easton 4MM ML Stainless Steel Break-off Point # 2070337  
  •  2000-900 use #1 | 1150-730 use #2 | 730-500 use #3 | 500-340 use #4
  • #1 60-80 grains
  • #2 70-90 grains
  • #3 90-110 grains
  • #4 100-120 grains
  • Avance compatible with Easton 4MM HL Stainless Steel Break-off Points #2070898
  • 2000-900 spine use #1| 810-550 spine use #2 | 500-450 spine use #3 | 410-340 spine use #4
  • Weight: 130 grains

Specifications

  • Height: 0.238
  • Width: 0.750

Reviews