Easton FMJ T-64 Arrow Shaft

Easton FMJ T-64 Arrow Shaft

Item # 2070827 | Catalog Page # 59
Pack 12-pack
If you would like Lancaster Archery to install factory-included components for you, please check the box above. If the Install Components box is checked and the Custom Cut Length field is left blank, your shafts will be shipped uncut with inserts/points installed at full length.
Lancaster Archery can custom cut your arrow shafts for you. Enter your precise shaft length as measured from end to end of the shaft, excluding any hardware (nocks, bushings, inserts, and points). If you leave this field blank, your shafts will be shipped uncut at full length.


WARNING: cancer and reproductive harm - www.P65Warnings.ca.gov

Bare Arrow Shafts Only

If you wish to have these arrow shafts fletched, please call customer service at 1-800-829-7408 to place your order. Learn More


  • Arrow penetration is vital when it comes to successful big game hunting
  • Proven FMJ technology is combined with a rear bias taper that creates a reduced friction path for lethal results in the field
  • Shaft profile starts at the front with a 6mm diameter that tapers seamlessly down to a micro diameter 4mm at the nock end
  • This design builds in 30% more F.O.C. without adding point weight, for best in class long-range accuracy


  • 2 different deflection factors that will cover all spines from 400 to 300
  • Deflection factor 7.9 (310 spine)
  • Deflection factor 9.5 (375 spine)
  • Cutting from the front end of the shaft will weaken the spine, (max cut line is laser etched on front of shaft)
  • Cutting from the nock end of the shaft will stiffen the spine (no cut limit from back)
  • RPS insert with standard 8-32 point and broadhead compatibility
  • Utilizes .166" nocks
  • Will accept a .166" lighted nock