Uukha Gobi ILF Recurve Limbs (Medium-30lbs) (Open Box X1040156)
WEAR MARKS & NO PACKAGING
FREE STANDARD GROUND SHIPPING
OPEN BOX
Description
Medium (62” measured on 19” riser) 30 pounds
Product shows previous mounting marks, Packaging was damaged upon opening and is not included
Limited inventory, available while supplies last and not eligible for return
Special pricing on this item is available online only
The Gobi, with 50% carbon and 50% glass, compares to some of the best limbs on the market. Higher speed allows the archer to shoot longer distances, even with low poundage.
- Nature limbs have the same profile and construction as the target limbs with fewer graphics and are dedicated to field, 3D, and hunting applications
- The S-Curve profile (S for Smoothness, Speed, and Stability) combines the best attributes of our previous Curve and Xcurve limbs.
- Faster limbs improve accuracy, especially in windy conditions, the lower trajectory means less time in the air, less wind drift, better sight marks, and easier unmarked estimations at longer distances.
- Smooth drawing helps when shooting many arrows by helping you maintain proper technique as if you were using a lower-poundage bow.
- Draw force Curve (DFC) means less slope at your draw length equaling a smoother draw and is equivalent to an increase of only about 3.5% during the last inch of the draw cycle
- Stability comes from the limbs’ torsional stiffness. This acts at two levels: first, if your limbs resist torsion, it will be very difficult to apply torque to the riser, and your bow will remain in line; second, when the arrow accelerates, nock travel will be straighter resulting in better grouping.
- We have upgraded the Monolith Carbon with new lay-ups to reduce mass and stresses, and are made from many unidirectional tapes of prepreg carbon, molded and fused together in CNC molds. This makes our limbs light, strong, and resistant to delamination.
- The limbs are made with a screwless design that has enabled us to reduce the maximum thickness and mass weight while keeping the ILF standard dimensions and redesigning the dovetail lowering the stresses around the hole
- Matte finish with standard decal
NOTE: Uukha Formula adapters cannot be used with S-Curve limbs.