The Greatest Tuning Ever.

The original TriTech had the most comprehensive and advanced compound bow tuning systems on the market. The TriTech V2 takes it to a new level. 

With updates to the riser leading to a lighter and more rigid bow, the 2027 toolless cam timing system, and the Perfect Tune adjustable pocket tuning technology, the TriTech V2 builds on the advancements made in the original TriTech. 

With the updated tuning and riser technology, the V2 still features the incredibly smooth and efficient draw cycle that was famous on the original TriTech as well as the integrated mounting systems and Dual Function micro adjustable roller guard. 
 

Features: 

• Updated Riser Geometry: The TriTech V2 features an improved riser geometry when compared to the original TriTech. This allows for a more rigid and precise riser system while also cutting down on total riser weight. 
• Perfect Tune Adjustable Pocket System: Equipped with the Perfect Tune adjustable pocket system, the TriTech V2 allows for easy and precise paper tuning. A single adjustment screw for each pocket can be installed over the top of either the right or left limb and screwed inward any amount until bottoming to influence paper tear of the bow.
• Cam Timing Adjustment: The Toolless V2 Timing Yoke allows for easy timing adjustment. The benefit of the Toolless Timing Yoke is that the bow does not need to be pressed, and you don’t need to remove the cable from the cam to twist. Simply twist the cable anchor of the Toolless Timing Yoke. You can twist in any amount you like and are no longer limited to full or half twist increments with each micro adjust click yielding 1/16 of one twist (or 16 clicks per twist).
• IMS and Picatinny Mounting: Each TriTech V2 includes a Picatinny sight mount block to allow for a more streamlined, lighter, and balanced sight system. The IMS rest mount allows for rests compatible with the IMS system to be mounted in order to build a solid, balanced rest system. 
• Dual Function Micro Adjust Roller Guard: Darton’s new micro adjust roller guard can be used to fine tune both fletching-to-cable clearance as well as influence paper tear. To adjust paper tear: If you have a left tear move roller guard to the left, if you have a right tear move the roller guard to the right, the opposite is true for a left-handed shooter. 
• Independently Adjustable Draw Stop: Each BBS Cam system is equipped with an interchangeable draw stop, the standard small diameter draw stop produces 85% let off and the larger diameter lower let off draw stop produces 75% (when switching from the small diameter 85% stop to the larger diameter 75% stop draw length will be decreased by approximately 1/8”.
• BBS CAM Draw Length Adjustment: No bow press is required to change the draw lengths of the BBS Cams. The only requirement is a 7/64 Allen Wrench to adjust the modules and a 3/32” Allen wrench to adjust the draw stops. There is no need to re-tune the bow after the draw length is changed. Important note: the two module screws should be positioned as far out on each end of the modules as possible.
• BBS Cam Module Choices: Darton bows equipped with BBS Cams now include two sets of modules. The “Standard” and the “Speed” module. The easy drawing “Standard” module is factory installed, and the “Speed” mod can be used in its place for increased performance. 
   

Includes: 1x standard mod, 1x speed mod