Easton 4mm Axis Pro Long Range Arrow Shaft

Easton 4mm Axis Pro Long Range Arrow Shaft

Item # 2070891 | Catalog Page # 59
If you would like Lancaster Archery to install factory-included components for you, please check the box above. If the Install Components box is checked and the Custom Cut Length field is left blank, your shafts will be shipped uncut with inserts/points installed at full length.
Lancaster Archery can custom cut your arrow shafts for you. Enter your precise shaft length as measured from end to end of the shaft, excluding any hardware (nocks, bushings, inserts, and points). If you leave this field blank, your shafts will be shipped uncut at full length.


WARNING: cancer and reproductive harm - www.P65Warnings.ca.gov

Bare Arrow Shafts Only

If you wish to have these arrow shafts fletched, please call customer service at 1-800-829-7408 to place your order. Learn More


  • 4mm micro-diameter uniform ACU-Carbon fiber construction
  • Pre-installed 4mm Microlite nocks
  • Straightness: .001"
  • Uses 5/16" diameter field point
  • Compatible with Easton 4MM Titanium Half-Out #207080 & 8/32 Easton 4MM Half-Outs #2070887
  • Includes 8/32 Easton 4MM Half-Outs (Aluminum) #2070887 for optimum FOC

Spine Size (Weight):
  • 250 spine (9.8 gpi)
  • 300 spine (9.3 gpi)
  • 340 spine (8.3 gpi)
  • 400 spine (7.4 gpi)

Included Half-Out Specifications:
  • Precise two-point interface with shaft increases strength
  • 1/16" +/- shaft engagement under half out
  • Spine-specific construction allows for the tightest tolerance between components
  • Non-reflective black anodized finish
  • Adds 1" to carbon length
  • Weight: 50 grain

Included Half-Out Fitment:
  • 400 spine use #1
  • 340 spine use #2
  • 300 spine use #4
  • 250 spine use #4